Feasibility of the recovery of uranium from alkaline waste by amidoximated grafted polypropylene polymer matrix

The amidoximated grafted polypropylene polymer matrix was prepared by post irradiation grafting of acrylonitrile (AN) onto thermally bonded non-woven matrix of poly(propylene) sheet using electron beams. This precursor polymer was reacted with hydroxylamine to convert AN to poly(acrylamidoxime) (AO) groups, and conditioned by treating them with 2.5 % KOH at 80 °C for 1 h. The polymer matrix was having the degree of AN grafting ~106 wt% and its subsequent conversion to AO groups ~70 %. The water uptake capacity of AO polymer matrix were found to be 100 ± 5 % (w/w). Quantitative recovery of uranium from alkaline waste (ammonium diuranate supernatant) solution was achieved by this polymer matrix. The other radionuclides present in the waste solution were not extracted by the polymer matrix. For all other radionuclides, the uptake was found to be <6 %.     

A catalyst-free protocol for direct oxidative esterification of alcohols and aldehydes

A fast, simple, and efficient protocol for the direct conversion of alcohols and aldehydes to methyl ester has been developed using TsNBr₂ without any catalyst. The one pot reaction proceeds in the presence of a base at room temperature in methanol, to produce the corresponding methyl ester in high yield within a short time.     

A facile microwave assisted synthesis of spiro-1,3-oxazines from N-(2-(cyclohex-1-en-1-yl)ethyl)amides

A mild and efficient methodology has been developed for the synthesis of spiro-1,3-oxazine derivatives by the microwave assisted cyclization of N-2-(1′-cyclohexenyl)ethyl-acetamides/benzamides. The reaction was catalyzed by in situ generated trimethylsilyl iodide and featured by its very short reaction time. The starting materials were easily obtained by the condensation of substituted acetic/benzoic acids with 2-(1′-cyclohexenyl)ethyl amine.     

Hydrothermal processing of waste pine wood into industrially useful products

An ongoing major outbreak of mountain pine beetle in Western Canada has provided a clear opportunity to utilize waste pinewood as a source of renewable energy. Therefore hydrothermal processing of waste pinewood as a feedstock for bio-oil and biochar production using subcritical and supercritical water technology was carried out in semi-batch mode to investigate the effect of pressure (200–400 bar) and temperature (300–400 °C) on the yield and composition of bio-oil. The pinewood samples have very high cellulose and hemicellulose content but low ash content and are thus a formidable feedstock for bioenergy production. The optimum conditions for the hydrothermal processing of the pinewood in a tubular reactor were found to be 400 °C and 250 bars with respect to biochar and bio-oil yield based on the highest calorific value analysis. Detailed characterization of bio-oil and biochar was performed using GCMS, NMR, SEM, calorific value, and elemental analysis, respectively. The critical components of bio-oil were found to be phenols, methoxyphenols, hydroxymethyl furfural (HMF), and vanillin, whereas as compared to the raw pine wood, the biochar was considerably lower H:C and O:C ratios than those of the unprocessed pinewood. The analyses of bio-oil by means of GCMS and ¹H NMR showed that it was mainly composed of heterocyclic compounds, phenols, aldehydes and acids.     

β-Cyclodextrin-based chiral nanocomposite for thin-layer chromatographic detection of enantiomers of fluoxetine

Enantioselective analysis or separation is very essential for improved therapeutic effects of drugs as the pure enantiomeric drug formulations display potential benefits over racemates. In this work, we carried out (i) the synthesis of a nanocomposite of β-cyclodextrin and 3D graphene (G/β-CD NC), and (ii) its application for the detection of fluoxetine enantiomers [(RS)-FLX)] using a thin-layer chromatographic method. The synthesized nanocomposite was introduced into silica gel slurry while preparation of thin-layer plates. The separation conditions were optimized by altering pH, temperature, and mobile phase composition. The method is simple and easy to be optimized, and it can therefore be exploited to assess and monitor routine work of enantiomeric purity of drug enantiomers. The average precision (as measured by RSD) was in the region of 1.35‒1.65% for the enantiomers of (RS)-FLX. The measured limit of detection and limit of quantification for (RS)-FLX enantiomers were 1.8 and 5.4 mg mL^‒1, respectively.

     

Effects of Dielectric Barrier Discharge Plasma on Physicochemical Characteristics,Mechanical Properties and Biocompatibility of Silk/PVA Nanofibers

Plasma Chemistry and Plasma Processing - This work reports an investigation of the discharge characteristics of atmospheric dielectric barrier discharge (DBD) plasma in terms of I-V curves and...     

Rotary disc bioreactor-based approach for bacterial nanocellulose production using Gluconacetobacter xylinus NCIM 2526 strain

Bacterial nanocellulose (BNC) is an indomitable biomaterial of utmost usage in different technological areas. Previously, the BNC production has been reported in the simplified bioreactors. Thus, pioneering bioreactor-assisted strategies are desirable for the commendable BNC production. Advanced bioreactors must be corroborated along with different bacterial strains to obtain creditable BNC yield. This study deals with BNC production in rotary disc bioreactor (RDBR) using Gluconacetobacter xylinus NCIM 2526 strain. RDBR-based production of BNC provided 189?±?14 gL^?1 of wet BNC, i.e., equivalent to 6.6?±?0.3 gL^?1 dry BNC yield in 10 days. However, in static cultivation mode, 56?±?12 gL^?1 wet weight of BNC, corresponding to 2.4?±?0.4 gL^?1 dry weight, was produced. Thus, BNC production was approximately 2.75 folds higher in RDBR than statically produced BNC from the same volume of the media. The sugar to BNC conversion yield (12.2?±?0.8%) was doubled in RDBR-based production as compared to static BNC production (6.2?±?1.4%) with efficient sugar consumption (90.0?±?3.3%). The maximum amount of BNC was produced at 7 RPM and pH 6. RDBR-based BNC showed a more hydrophilic nature than statically produced BNC. The RDBR might be appropriate for large-scale BNC production, especially for wet-end applications, as an ample amount of BNC can be produced from a single fermentation process. These BNC pellicles might have the potential for biomedical applications like wound dressings, biofacial masks, hydrogels, and tissue engineering scaffolds.

     

Conifers Phytochemicals: A Valuable Forest with Therapeutic Potential

Conifers have long been recognized for their therapeutic potential in different disorders. Alkaloids, terpenes and polyphenols are the most abundant naturally occurring phytochemicals in these plants. Here, we provide an overview of the phytochemistry and related commercial products obtained from conifers. The pharmacological actions of different phytochemicals present in conifers against bacterial and fungal infections, cancer, diabetes and cardiovascular diseases are also reviewed. Data obtained from experimental and clinical studies performed to date clearly underline that such compounds exert promising antioxidant effects, being able to inhibit cell damage, cancer growth, inflammation and the onset of neurodegenerative diseases. Therefore, an attempt has been made with the intent to highlight the importance of conifer-derived extracts for pharmacological purposes, with the support of relevant in vitro and in vivo experimental data. In short, this review comprehends the information published to date related to conifers’ phytochemicals and illustrates their potential role as drugs.     

Observation of two resonant structures in e+ e- -->pi+ pi- psi(2S) via initial-state radiation at Belle

The cross section for e+ e- --> pi+ pi- psi(2S) between threshold and sqrt[s]=5.5 GeV is measured using 673 fb(-1) of data on and off the Upsilon(4S) resonance collected with the Belle detector at KEKB. Two resonant structures are observed in the pi+ pi- psi(2S) invariant-mass distribution, one at 4361 +/- 9 +/- 9 MeV/c2 with a width of 74 +/- 15 +/- 10 MeV/c2, and another at 4664 +/- 11 +/- 5 MeV/c2 with a width of 48 +/- 15 +/- 3 MeV/c2, if the mass spectrum is parametrized with the coherent sum of two Breit-Wigner functions. These values do not match those of any of the known charmonium states.